Before the acceptance and delivery of the project， the board surface shall be wiped clean. If there is any scratch，Cold storage installation schemeThere are still many difficulties in the recycling industry it shall be treated. There shall be no obvious scratch on the board surface.
Will not be affected.
PwSet the parameters and valve opening in the computer according to the frosting and use of the fresh-keeping warehouse.
mInstall the electric control system. The electric control system of the cold storage mainly includes electric controller，Polyurethane spraying warehouse electric door， lighting and other electrical equipment in the cold storage. The power supply of the cold storage is required to be stable phase line，Cold storage installation - cold storage installation - cold storage construction - fruit preservation cold storage medicine cold storage - Anhui Fuyang Xinyuan Refrigeration Technology Engineering Co., Ltd and the power supply or backup power supply can be used as required. The circuit shall have reasonable discharge and corresponding protective measures.
Cold storage installation worksFactors affecting selection
The stacking and arrangement of cargo stacks in the controlled atmosphere warehouse have a great impact on the air circulation. A basic principle of air flow is to take the path with low resistance to obtain large air flow. If there is a dead corner caused by stacking obstruction and air circulation is difficult， the temperature will rise. For this reason，Cold storage installation schemeThere are still many difficulties in the recycling industry there shall be gaps between the cargo stacks and between the cargo stacks and the wall. The stacking arrangement of the cargo stacks shall be coordinated with the ventilation arrangement.
The refrigerant charge is insufficient. At this time，Polyurethane spraying warehouse just add enough refrigerant.
Here we focus on polyurethane. Polyurethane is an ideal cold storage material in the cold storage project. Superior bonding properties make the foam and metal panels form a solid whole，Polyurethane spraying warehouse rigid polyurethane foam is formed between the panels of the storehouse panel， and then solidified and pressed to form a multi shape storeboard， so that the overall rigidity is stronger and the bearing capacity is higher. Polyurethane filler board can meet the firmness and physical requirements of exterior wall and can be used in various cold storage projects. It is technically feasible and cost-effective. Yuanbao refrigeration believes that polyurethane is one of the new cold storage materials with great development prospects in the future. The thermal insulation materials of cold storage engineering should not only have good thermal insulation performance， but also be economical， applicable and environmental friendly. To ensure the smooth progress of our cold storage project， we should not only inquire about the raw materials of the cold storage， but also the types of cold storage. The common cold storage plates mainly include the following types， namely stainless steel plate， color zinc steel plate， salted steel plate， embossed aluminum plate and mm galvanized standard floor plate.